Explosion Hazard 不要塞住閥門。 不要拆卸掉閥門。 不遵守這些說明可能會導致死亡或爆炸。 If the temperature and pressure relief valve is dripping or leaking, have a licensed plumber repair it. Do not plug valve. Do not remove valve. Failure to follow these instructions can result in death or explosion. |
每年至少人工操作一次降溫減壓安全閥,以確保保持正常的工作狀態。為了防止水的破壞,降溫減壓安全閥必須正確連接排泄管,并通過排泄管引導到適當的排污口。站立位置離出水口要有適當的距離(排泄物可能是熱的),緩慢提升并釋放降溫減壓安全閥上的杠桿手柄,使得閥門工作自如,然后重新回到關閉位置。如果閥門無法完全重置并繼續釋放出水來,請立即關閉電源和冷水進水閥,致電擁有資格認證的維修技術人員來維修。
Manually operate the temperature and pressure relief valve at
least once a year to make sure it is working properly. To prevent water damage,
the valve must be properly connected to a discharge line which terminates at an
adequate drain. Standing clear of the outlet (discharged water may be hot),
slowly lift and release the lever handle on the temperature and pressure relief
valve to allow the valve to operate freely and return to its closed position. If
the valve fails to completely reset and continues to release water, immediately
shut off the electrical power and the cold water inlet valve and call a
qualified service technician.
技術服務中心 客服專線
服務熱線:021-51029115
聯系地址:上海市澳門路519號